- Published on
KembaraXtra-Computer Terms – atomic operation:
An atomic operation is a process that is considered indivisible, meaning it cannot be interrupted while it is being executed. If the operation is aborted before completion, a recovery mechanism restores the system to its original state before the operation began.
An atomic operation is a process that is considered indivisible, meaning it cannot be interrupted while it is being executed. If the operation is aborted before completion, a recovery mechanism restores the system to its original state before the operation began.
- Published on
KembaraXtra-Computer Terms – atomic transaction:
An atomic transaction is a group of operations that follow the “all or nothing” rule. Either all operations are completed successfully or none of them take effect. This approach is commonly used in systems such as financial transfers or order processing to ensure that data remains consistent. If any part of the transaction fails, the entire transaction is cancelled and the system returns to its previous state.
An atomic transaction is a group of operations that follow the “all or nothing” rule. Either all operations are completed successfully or none of them take effect. This approach is commonly used in systems such as financial transfers or order processing to ensure that data remains consistent. If any part of the transaction fails, the entire transaction is cancelled and the system returns to its previous state.
- Published on
KembaraXtra-Computer Terms – attach:
Attach means to include an external file, document, or executable program with an e-mail message so that it can be sent to the recipient along with the message.
Attach means to include an external file, document, or executable program with an e-mail message so that it can be sent to the recipient along with the message.
- Published on
KembaraXtra-Computer Terms – attached document:
An attached document is a file included with an e-mail message as an attachment. It may be an ASCII text file or a binary file such as a word-processing document, and it is typically encoded using formats that allow it to be transmitted through e-mail systems.
An attached document is a file included with an e-mail message as an attachment. It may be an ASCII text file or a binary file such as a word-processing document, and it is typically encoded using formats that allow it to be transmitted through e-mail systems.
- Published on
KembaraXtra-Computer Terms – attached processor:
An attached processor is a secondary processor connected to a computer system to assist with specific tasks. Examples include processors used in keyboard controllers or video subsystems that handle specialized processing separate from the main CPU.
An attached processor is a secondary processor connected to a computer system to assist with specific tasks. Examples include processors used in keyboard controllers or video subsystems that handle specialized processing separate from the main CPU.
- Published on
KembaraXtra-Computer Terms – attachment:
An attachment is a file that is sent together with an e-mail message. The attached file is an exact copy of the original file stored on the sender’s computer and can include many different types of files such as documents, executable programs, images, or compressed archives containing multiple files. Although it accompanies the e-mail message, the attachment itself is not part of the actual message text. To allow the file to be transmitted through e-mail systems, it is typically encoded using formats such as uuencoding, MIME, or BinHex. Most modern e-mail applications automatically encode files before sending them and decode them when they are received. The recipient must use an e-mail program capable of decoding the file or a separate decoding utility in order to open and read it. Some e-mail systems or gateways may restrict attachments based on file size, but most allow multiple files to be attached to a single e-mail message.
An attachment is a file that is sent together with an e-mail message. The attached file is an exact copy of the original file stored on the sender’s computer and can include many different types of files such as documents, executable programs, images, or compressed archives containing multiple files. Although it accompanies the e-mail message, the attachment itself is not part of the actual message text. To allow the file to be transmitted through e-mail systems, it is typically encoded using formats such as uuencoding, MIME, or BinHex. Most modern e-mail applications automatically encode files before sending them and decode them when they are received. The recipient must use an e-mail program capable of decoding the file or a separate decoding utility in order to open and read it. Some e-mail systems or gateways may restrict attachments based on file size, but most allow multiple files to be attached to a single e-mail message.
- Published on
KembaraXtra-Computer Terms – attenuation:
Attenuation refers to the gradual weakening or reduction in strength of a signal as it travels through a transmission medium. This weakening can occur with different types of signals, including digital data signals and electrical signals, and may result in distortion or reduced amplitude by the time the signal reaches its destination. Attenuation commonly occurs in communication systems such as telephone lines, network cables, and wireless transmissions, where signal strength naturally decreases with distance from the source. It is usually measured in decibels (dB). In some situations attenuation is undesirable because it can reduce signal quality and cause errors in data transmission. However, it can also be intentionally applied in electronic systems—for example, using a volume control on a radio to reduce signal strength and prevent overloading or distortion.
Attenuation refers to the gradual weakening or reduction in strength of a signal as it travels through a transmission medium. This weakening can occur with different types of signals, including digital data signals and electrical signals, and may result in distortion or reduced amplitude by the time the signal reaches its destination. Attenuation commonly occurs in communication systems such as telephone lines, network cables, and wireless transmissions, where signal strength naturally decreases with distance from the source. It is usually measured in decibels (dB). In some situations attenuation is undesirable because it can reduce signal quality and cause errors in data transmission. However, it can also be intentionally applied in electronic systems—for example, using a volume control on a radio to reduce signal strength and prevent overloading or distortion.
- Published on
KembaraXtra-Computer Terms – atto-:
Atto- is a metric prefix used in scientific and technical measurement to represent the value of 10^{-18}, which is one quintillionth of a unit. This extremely small measurement unit is commonly used in fields such as computing, physics, and nanotechnology when describing very small quantities, such as extremely short time intervals or very small electrical measurements.
Atto- is a metric prefix used in scientific and technical measurement to represent the value of 10^{-18}, which is one quintillionth of a unit. This extremely small measurement unit is commonly used in fields such as computing, physics, and nanotechnology when describing very small quantities, such as extremely short time intervals or very small electrical measurements.
- Published on
KembaraXtra-Computer Terms – attract mode:
Attract mode is a feature commonly used in commercial arcade games to display animations, demonstrations, or gameplay sequences when the machine is not actively being played. When no coin has been inserted and the game is idle, the screen cycles through various visual displays intended to attract the attention of potential players. These displays may demonstrate how the game works, show highlights of gameplay, or explain basic rules. In addition to drawing interest from people nearby, attract mode also helps prevent screen burn-in on older display technologies by constantly changing the images shown on the screen instead of leaving a static image displayed for long periods.
Attract mode is a feature commonly used in commercial arcade games to display animations, demonstrations, or gameplay sequences when the machine is not actively being played. When no coin has been inserted and the game is idle, the screen cycles through various visual displays intended to attract the attention of potential players. These displays may demonstrate how the game works, show highlights of gameplay, or explain basic rules. In addition to drawing interest from people nearby, attract mode also helps prevent screen burn-in on older display technologies by constantly changing the images shown on the screen instead of leaving a static image displayed for long periods.
- Published on
KembaraXtra-Computer Terms – attribute:
An attribute refers to a descriptive property or characteristic associated with a piece of data, a display element, or a markup structure. In database systems, an attribute represents the name or structure of a field within a record. For example, in a phone directory database, fields such as LASTNAME, FIRSTNAME, and PHONE represent attributes of each record. Attributes can also describe properties such as the type of data stored in a field or the field’s size. In computer display systems operating in character mode, attributes may refer to additional information associated with characters in the video buffer, controlling features such as foreground and background colors, blinking, or underlining. In markup languages such as HTML and SGML, an attribute is a name-value pair included within a tag that modifies or specifies characteristics of an element.
An attribute refers to a descriptive property or characteristic associated with a piece of data, a display element, or a markup structure. In database systems, an attribute represents the name or structure of a field within a record. For example, in a phone directory database, fields such as LASTNAME, FIRSTNAME, and PHONE represent attributes of each record. Attributes can also describe properties such as the type of data stored in a field or the field’s size. In computer display systems operating in character mode, attributes may refer to additional information associated with characters in the video buffer, controlling features such as foreground and background colors, blinking, or underlining. In markup languages such as HTML and SGML, an attribute is a name-value pair included within a tag that modifies or specifies characteristics of an element.
