- Published on
KembaraXtra–Computer Terms – 1394
The number 1394 identifies a high-speed serial communication interface formally standardized as IEEE 1394. Known popularly as FireWire, it was developed for quick data transfer between digital devices such as camcorders, external drives, and multimedia equipment. It supported fast, real-time data throughput and became a favored technology in professional video production and high-bandwidth consumer electronics.
- Published on
KembaraXtra–Computer Terms – 1.2M
The term 1.2M refers to a storage capacity of approximately 1.2 megabytes, most commonly associated with high-density 5.25-inch floppy disks. These disks were widely used during the early personal computing era as they offered greater capacity than their lower-density predecessors while still being compatible with standard floppy disk drives of the time. Their design provided a cost-effective storage option for software distribution and file transfer.
The term 1.2M refers to a storage capacity of approximately 1.2 megabytes, most commonly associated with high-density 5.25-inch floppy disks. These disks were widely used during the early personal computing era as they offered greater capacity than their lower-density predecessors while still being compatible with standard floppy disk drives of the time. Their design provided a cost-effective storage option for software distribution and file transfer.
- Published on
KembaraXtra–Computer Terms – 12-hour clock
The 12-hour clock is a method of representing time that divides the day into two repeating cycles labeled a.m. and p.m. Time progresses from 1:00 to 12:59 in each cycle before returning to 1:00 again. This format is commonly used in everyday communication, scheduling, and consumer devices. It contrasts with the 24-hour format, which counts the hours continuously from midnight to 23:59.
The 12-hour clock is a method of representing time that divides the day into two repeating cycles labeled a.m. and p.m. Time progresses from 1:00 to 12:59 in each cycle before returning to 1:00 again. This format is commonly used in everyday communication, scheduling, and consumer devices. It contrasts with the 24-hour format, which counts the hours continuously from midnight to 23:59.
- Published on
KembaraXtra–Computer Terms – 10Base-T
10Base-T is a widely adopted Ethernet standard that uses twisted-pair cabling to carry data at 10 megabits per second. The network is arranged in a star configuration, meaning each computer or device connects individually to a central hub, sometimes referred to as a multiport repeater. The use of common copper twisted-pair wires—often found in telephone installations—made this Ethernet version far easier to install and manage than earlier coaxial-based systems. It represented a major shift toward structured cabling systems used in modern networking.
10Base-T is a widely adopted Ethernet standard that uses twisted-pair cabling to carry data at 10 megabits per second. The network is arranged in a star configuration, meaning each computer or device connects individually to a central hub, sometimes referred to as a multiport repeater. The use of common copper twisted-pair wires—often found in telephone installations—made this Ethernet version far easier to install and manage than earlier coaxial-based systems. It represented a major shift toward structured cabling systems used in modern networking.
- Published on
KembaraXtra–Computer Terms – 10Base-FP
10Base-FP is a fiber-optic networking design from the 10Base-F family that enables a passive star configuration, meaning that stations connect to a central point that requires no electrical power for signal amplification. Up to several dozen devices can be linked through this passive hub, benefiting from fiber optics’ immunity to electrical noise and the ability to operate safely over longer distances. This approach was useful in environments requiring minimal maintenance or where electrical infrastructure was limited.
10Base-FP is a fiber-optic networking design from the 10Base-F family that enables a passive star configuration, meaning that stations connect to a central point that requires no electrical power for signal amplification. Up to several dozen devices can be linked through this passive hub, benefiting from fiber optics’ immunity to electrical noise and the ability to operate safely over longer distances. This approach was useful in environments requiring minimal maintenance or where electrical infrastructure was limited.
- Published on
KembaraXtra–Computer Terms – 10Base-F
10Base-F is an Ethernet standard designed for fiber-optic networking and provides a 10 megabit-per-second data rate within a star-shaped network layout. Every computer or device connects to a central hub, repeater, or concentrator through fiber-optic lines. Each station uses a dedicated fiber-optic transceiver, typically paired with connectors such as ST or SMA, which plug into the system’s network interface through an AUI connection. The 10Base-F family includes three specialized branches: 10Base-FB for backbone links requiring efficient synchronization over long distances, 10Base-FL for direct workstation-to-hub connections, and 10Base-FP for passive star setups that do not require powered repeaters. This set of standards brought the advantages of fiber, including electrical isolation and improved resistance to interference, into early LAN architecture.
- Published on
KembaraXtra–Computer Terms – 10Base5
10Base5 is one of the earliest Ethernet standards, providing 10 megabits per second of baseband communication over thick coaxial cable about three-eighths of an inch in diameter. This cable can stretch up to 500 meters per segment, making it useful for connecting larger areas or forming network backbones. Computers connect through an external transceiver, which attaches to a 15-pin AUI port on the network card and physically taps into the cable. Because of the cable’s rigidity and durability, this form of Ethernet came to be known as Thick Ethernet, ThickNet, or ThickWire. Though more difficult to install than its thin-cable counterpart, it delivered stronger signal integrity for long-distance network runs.
- Published on
KembaraXtra–Computer Terms – 10Base2
10Base2 is an early Ethernet networking method that operates at 10 megabits per second and uses thin coaxial cabling roughly three-sixteenths of an inch thick. This cable type supports network segments up to about 200 meters long and is arranged in a bus topology in which every machine shares the same cable line. Devices connect through a BNC connector attached to the network adapter. Because it used inexpensive cable and was easy to deploy in small offices, it became known by several alternate names, including Cheapernet, Thin Ethernet, ThinNet, and ThinWire. It represented an accessible, low-cost solution for organizations building their first LAN environments.
- Published on
KembaraXtra–Computer Terms – 256-bit
The term 256-bit refers to a system, processor, or data path capable of handling information in blocks that are 256 bits wide. This large data width is typically associated with certain cryptographic functions, high-performance processors, and specialized mathematical workloads. Wider data paths allow more information to be processed simultaneously, improving efficiency in tasks requiring large amounts of parallel computation.
The term 256-bit refers to a system, processor, or data path capable of handling information in blocks that are 256 bits wide. This large data width is typically associated with certain cryptographic functions, high-performance processors, and specialized mathematical workloads. Wider data paths allow more information to be processed simultaneously, improving efficiency in tasks requiring large amounts of parallel computation.
- Published on
KembaraXtra–Computer Terms – /24 network
A /24 network is an IP addressing configuration historically associated with Class C networks. This structure provides more than two million possible networks, each containing up to 254 usable host addresses. Such networks became widely used in small businesses, branch offices, and individual subnets because they offer manageable, moderately sized address blocks suitable for local devices, servers, and routing environments.
A /24 network is an IP addressing configuration historically associated with Class C networks. This structure provides more than two million possible networks, each containing up to 254 usable host addresses. Such networks became widely used in small businesses, branch offices, and individual subnets because they offer manageable, moderately sized address blocks suitable for local devices, servers, and routing environments.